CONTENTS LEGEND ORDERING INFORMATION ELBOWS TEES LATERALS CROSSES Y BRANCH RECTANGLE TO ROUND, REDUCER & OFFSET BELLMOUTH, COUPLING, ANGLE RING & END CAPS CURVED SADDLES, FLAT SADDLES, SPUN INSIDE: OUTSIDE COUPLING, SPUN INSULATION END & SPUN REDUCER CLAMP ACCESS DOOR & DUCT CONNECTIONS

	LEGEND
	E-ELBOW T-TEE L-LATERAL C-CROSS R-REDUCER SET-OFFSET Y-Y BRANCH  B-BELLMOUTH S-COUPLING		N-END CAP C SADD-CURVED SADDLE F SADD-FLAT SADDLE SIO-SPUN INSIDE-OUTSIDE   COUPLING SR-SPUN REDUCER SIE-SPUN INSULATION END AR-ANGLE RING CAD-CLAMP ACCESS DOOR
	DIMENSIONING CODE
	A B C,D,E,F P R S Z   Diameter of Main Inlet Diameter of Main Outlet, if Reducing Diameter of Take Off Taps Angle Between Cross Tap Centerlines Radius Length of Male End Fittings Offset height
	MATERIAL GALVANIZED STEEL
	ORDERING
	To order specify type of fittings and list the following dimensions:
	ELBOWS TEES LATERALS CROSSES ACCESSORIES -A(B,C) -A,C, (B, D) -A,C, (B, D) -A,C,D,(B,E,F,P) -As Noted
	The drawings shown herein are illustrative of the types manufactured. SPIDA does not recommend deviation from these standard measurements. All fittings, unless noted, are sized as a male part on each end of slip-joint assembly with spiral flange. Solid or Van Stone Flanges are available on special order.

Copyright © 2000  SPIDA